{"id":1430,"date":"2009-07-26T15:03:13","date_gmt":"2009-07-26T13:03:13","guid":{"rendered":"http:\/\/funrecycler.com\/?p=2730"},"modified":"2009-07-26T15:03:13","modified_gmt":"2009-07-26T13:03:13","slug":"es-ist-sommer-im-rechner-und-keiner-merkts","status":"publish","type":"post","link":"https:\/\/funrecycler.com\/index.php\/2009\/07\/26\/es-ist-sommer-im-rechner-und-keiner-merkts\/","title":{"rendered":"Es ist Sommer im Rechner und keiner merkts."},"content":{"rendered":"

Gerade ist unverhofft mein Rechner ausgegangen weil die Temperatur etwas zu hoch war. Um diesen Schock vorzeitig zu erkennen helfen ein paar nette Icons im gPanel <\/p>\n

\"temperatur\"<\/p>\n

\"temperatur1\" recht einfach geht es wenn man lm-senosors und das applet dazu installiert. <\/p>\n

<\/p>\n

sudo apt-get install lm-sensors sensors-applet<\/code><\/pre>\n
 dann nach den ansprechbaren Sensoren suchen <\/p>\n
sudo sensors-detect<\/code><\/pre>\n
 Alle Dialogfenster kann man mit YES beantworten. Damit die lm-sensors nach dem reboot funktioniert muss noch einiges in die \/etc\/modules eingetragen werden. <\/p>\n
#----cut here----\n# I2C adapter drivers\ni2c-nforce2\n# modprobe unknown adapter NVIDIA i2c adapter\n# modprobe unknown adapter NVIDIA i2c adapter\n# modprobe unknown adapter NVIDIA i2c adapter\n# Chip drivers\nw83791d\n# no driver for Analog Devices ADT7475 yet\nit87\ncoretemp\n#----cut here----<\/code><\/pre>\n
 Do you want to add these lines automatically? (yes\/NO)<\/strong> hab ich lieber per Hand gemacht. <\/p>\n
sensors<\/code><\/pre>\n
 und man kann schon einige Werte sehen. Nach einem Reboot kann man im Panel -> rechte Maustaste -> Zum panel Hinzuf\u00fcgen->"Hardware Sensor Monitor" hinzuf\u00fcgen, und auf den eigenen Bedarf anpassen. acpitz-virtual-0 Adapter: Virtual device temp1: +40.0\u00b0C (crit = +75.0\u00b0C) w83791d-i2c-1-2d Adapter: SMBus nForce2 adapter at 1c80 in0: +1.26 V (min = +0.00 V, max = +3.06 V) in1: +1.52 V (min = +0.00 V, max = +3.06 V) in2: +1.26 V (min = +2.82 V, max = +3.79 V) ALARM in3: +3.06 V (min = +0.00 V, max = +0.00 V) ALARM in4: +0.94 V (min = +0.13 V, max = +0.00 V) ALARM in5: +1.10 V (min = +0.00 V, max = +0.00 V) ALARM in6: +1.23 V (min = +2.05 V, max = +2.05 V) ALARM in7: +2.90 V (min = +0.00 V, max = +0.00 V) ALARM in8: +3.22 V (min = +0.00 V, max = +0.00 V) ALARM in9: +1.89 V (min = +0.00 V, max = +0.00 V) ALARM fan1: 0 RPM (min = -1 RPM, div = 8) ALARM fan2: 0 RPM (min = 42187 RPM, div = 8) ALARM fan3: 0 RPM (min = -1 RPM, div = 8) ALARM fan4: 0 RPM (min = 42187 RPM, div = 8) ALARM fan5: 0 RPM (min = -1 RPM, div = 8) ALARM temp1: +37.0\u00b0C (high = +0.0\u00b0C, hyst = +0.0\u00b0C) ALARM temp2: +37.0\u00b0C (high = +80.0\u00b0C, hyst = +75.0\u00b0C) temp3: +37.0\u00b0C (high = +80.0\u00b0C, hyst = +75.0\u00b0C) cpu0_vid: +1.419 V beep_enable:enabled it8718-isa-0290 Adapter: ISA adapter in0: +1.22 V (min = +0.00 V, max = +4.08 V) in1: +3.22 V (min = +0.00 V, max = +4.08 V) in2: +0.00 V (min = +0.00 V, max = +4.08 V) ALARM in3: +2.96 V (min = +0.00 V, max = +4.08 V) in4: +2.91 V (min = +0.00 V, max = +4.08 V) in5: +0.00 V (min = +0.00 V, max = +4.08 V) ALARM in6: +0.00 V (min = +0.00 V, max = +4.08 V) ALARM in7: +2.83 V (min = +0.00 V, max = +4.08 V) in8: +2.99 V fan1: 2576 RPM (min = 3245 RPM) ALARM fan2: 0 RPM (min = 3245 RPM) ALARM fan3: 0 RPM (min = 0 RPM) temp1: +34.0\u00b0C (low = -1.0\u00b0C, high = +127.0\u00b0C) sensor = thermal diode temp2: +42.0\u00b0C (low = -1.0\u00b0C, high = +127.0\u00b0C) sensor = thermistor temp3: -55.0\u00b0C (low = -1.0\u00b0C, high = +127.0\u00b0C) sensor = thermistor cpu0_vid: +0.000 V coretemp-isa-0000 Adapter: ISA adapter Core 0: +47.0\u00b0C (high = +82.0\u00b0C, crit = +100.0\u00b0C) coretemp-isa-0001 Adapter: ISA adapter Core 1: +47.0\u00b0C (high = +82.0\u00b0C, crit = +100.0\u00b0C) coretemp-isa-0002 Adapter: ISA adapter Core 2: +42.0\u00b0C (high = +82.0\u00b0C, crit = +100.0\u00b0C) coretemp-isa-0003 Adapter: ISA adapter Core 3: +38.0\u00b0C (high = +82.0\u00b0C, crit = +100.0\u00b0C) Vielen Dank f\u00fcr den Tipp von Easyy-S (www.ubuntufreunde.de)<\/p>\n","protected":false},"excerpt":{"rendered":"
Gerade ist unverhofft mein Rechner ausgegangen weil die Temperatur etwas zu hoch war. Um diesen Schock vorzeitig zu<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[3,9,4,8,13],"tags":[663,592,914,915,916,917,918,111],"class_list":["post-1430","post","type-post","status-publish","format-standard","hentry","category-computer-und-technik","category-kniffe-und-tricks","category-linux-computer-und-technik","category-software","category-tutorial","tag-apt-get","tag-install","tag-lm-sensors","tag-on-gnome","tag-panel","tag-sensors-applet","tag-sudo","tag-temperatur"],"_links":{"self":[{"href":"https:\/\/funrecycler.com\/index.php\/wp-json\/wp\/v2\/posts\/1430","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/funrecycler.com\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/funrecycler.com\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/funrecycler.com\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/funrecycler.com\/index.php\/wp-json\/wp\/v2\/comments?post=1430"}],"version-history":[{"count":1,"href":"https:\/\/funrecycler.com\/index.php\/wp-json\/wp\/v2\/posts\/1430\/revisions"}],"predecessor-version":[{"id":2444,"href":"https:\/\/funrecycler.com\/index.php\/wp-json\/wp\/v2\/posts\/1430\/revisions\/2444"}],"wp:attachment":[{"href":"https:\/\/funrecycler.com\/index.php\/wp-json\/wp\/v2\/media?parent=1430"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/funrecycler.com\/index.php\/wp-json\/wp\/v2\/categories?post=1430"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/funrecycler.com\/index.php\/wp-json\/wp\/v2\/tags?post=1430"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}